Home › Glossary › Vinyl Siding
Siding term
Vinyl Siding
Definition: Vinyl siding is exterior wall cladding made mainly from polyvinyl chloride (PVC), manufactured in panels that interlock and hang loosely on nails so they can expand and contract.
What is Vinyl Siding?
Vinyl siding is exterior cladding made mostly from polyvinyl chloride (PVC). It comes in long panels that lock together and hang on nails with room to slide, so the panels can expand in heat and shrink in cold without buckling.
It is sold in many colors and profiles, including lap and vertical styles.
Why it matters
Vinyl siding does not need painting and is widely used on homes because of its cost and low upkeep. Correct installation matters: panels nailed too tight can buckle in summer heat, and the house wrap and flashing behind the siding are what keep water out of the wall.
Siding is the outer layer of the wall, but the water protection depends on what is behind it. House wrap, flashing around windows and doors, and correct nailing all decide whether the siding keeps water out over time.
What the building code requires
The International Residential Code, section R703.11, which Maryland’s building code is based on, says:
- Vinyl siding must be certified to ASTM D3679 and installed following the manufacturer’s instructions.
- Nails need a shank at least 0.120 inch and a head at least 0.313 inch across, or 16-gauge staples may be used.
- Fasteners must penetrate at least 1 1/4 inches into nailable material.
Why nailing technique matters
Because vinyl moves with temperature, it should not be nailed tight. Panels that are pinned can wave or buckle on hot days. Installers follow the manufacturer’s spacing and gap rules for nails and trim.
Panels should also be able to slide slightly side to side after nailing. If a panel cannot move at all, it was likely fastened too tightly.
Signs it may be time for new siding
- Cracked, loose or missing panels.
- Warping or buckling.
- Faded or chalky panels on the sunny side.
- Soft wall sheathing found behind the siding.
- Rising heating and cooling bills, which can point to gaps in the wall.
In a home built before 1978, removing old siding over painted wood can disturb lead paint, which brings in the EPA lead-safe rules for contractors.
Learn more
These pages cover related exterior topics.
Related Heward services
Frequently asked questions
Does vinyl siding need to be painted?
No. The color is built into the vinyl, so it does not need regular painting the way wood siding does.
What standard does vinyl siding have to meet?
The IRC requires vinyl siding to be certified to ASTM D3679.
Why is my vinyl siding wavy?
Waves or buckles often mean the panels were nailed too tightly and cannot move as the temperature changes.
Have a question about your project?
Ask about your roof, siding, windows or interior project: Contact Heward Home Improvement.
